Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® Advanced T1000HG10 LS BK - PA6T/6I-GF50 - BASF

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - 물질의 비성질 - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

Heat stabilized, partially aromatic polyphthalamide for injection molding with strong mechanical properties especially at elevated temperatures, and excellent chemical resistance for highly stressed parts. Ultramid® Advanced T1000HG10 LS BK can be characterized as compound with high strength and stiffness, very low water absorption and outstanding dimensional stability. It features a high melting point (320°C) and excellent melt stability.

Markets & applications
Automotive: Fuel system, cooling system, powertrain, metal replacement
Industry goods: Pumps, compressors
Consumer goods: Home appliances, consumer electronics, furniture fittings

Processing/Physical Characteristics	건조/응축	단위	시험규격
ISO 데이터
성형 수축률, 평행	0.5 / *	%	ISO 294-4, 2577
성형 수축률, 수직	0.9 / *	%	ISO 294-4, 2577

기계적 특성	건조/응축	단위	시험규격
ISO 데이터
인장탄성률	18000 / 18000	MPa	ISO 527
파단시 강도	250 / 250	MPa	ISO 527
파단시 신율	1.8 / 1.8	%	ISO 527
챠피 충격 강도 , +23°C	75 / 70	kJ/m²	ISO 179/1eU
챠피 충격 강도, -30°C	65 / 65	kJ/m²	ISO 179/1eU
챠피 노치드 충격 강도, +23°C	10 / 11	kJ/m²	ISO 179/1eA
챠피 노치드 충격 강도, -30°C	10 / 10	kJ/m²	ISO 179/1eA

열적 특성	건조/응축	단위	시험규격
ISO 데이터
녹는점, 10°C/min	320 / *	°C	ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa	280 / *	°C	ISO 75-1/-2

전기적 특성	건조/응축	단위	시험규격
ISO 데이터
부피 저항	- / >1E13	Ohm*m	IEC 62631-3-1
표면 저항	* / >1E15	Ohm	IEC 62631-3-2
전기 압력	40 / -	kV/mm	IEC 60243-1
CTI	- / 550	-	IEC 60112

기타 특성	건조/응축	단위	시험규격
물에서의 흡수성	2.9 / *	%	ISO 62와 유사
조건에서의 흡습성	1.3 / *	%	ISO 62와 유사
밀도	1640 / -	kg/m³	ISO 1183

물질의 비성질	건조/응축	단위	시험규격
ISO 데이터
점도수	100 / *	cm³/g	ISO 307, 1157, 1628

도표

특징

생산 공정

사출 성형

인도 유형

펠렛 (입자,알갱이), 검정

특별 특성

열안정성

특성

Melt Strength

내화학성에

General Chemical Resistance

응용

자동차의, 전기 및 전자

지역별 검색

쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧

기타 정보

사E성

PREPROCESSING
Pre/Post-processing, max. allowed water content: .05 %
Pre/Post-processing, Pre-drying, Temperature: 120 °C
Pre/Post-processing, Pre-drying, Time: 8 h

PROCESSING
injection molding, Melt temperature, range: 345 - 355 °C
injection molding, Melt temperature, recommended: 350 °C
injection molding, Mold temperature, range: 150 - 190 °C
injection molding, Mold temperature, recommended: 150 °C
injection molding, Dwell time, thermoplastics: 5 min

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.